Which Would Be Better Choice: Autel MK808 VS Autel DS808?

The Autel MK808 professional diagnostic scanner and DS808 are two excellent Automotive diagnostic scanners. They’re of the same size and have similar features. Their screen size is 7-inches and uses the Android 4.4.4 operating system. These scan tools are also easy to use and cover a wide range of vehicles.

Customers will learn more similarities and differences between these two diagnostic scanners with the content below. This will help them to decide on which scanner to pick for your needs.

Here below shares the comparison chart for customers to identify:

Functions/Features	Autel MK808	Autel DS808
Display	7-inch LCD capacitive touchscreen	7-inch LCD capacitive touchscreen
Bidirectional	NO	YES
Active Test	NO	YES
Power Balance	NO	YES
Configurable Engine Immobilizer(CEI)lock configuration	NO	YES
Pull Drift Compensation(PDC)Reset	NO	YES
Check and Adjust Fuel Balance	NO	YES
Passenger Zero Seat Weight Test	NO	YES
Hybrid Operation Mode Adjustment	NO	YES
Operating Temperature	0 to 55°C	-10 to 60°C
Storage Temperature	-20 to 60°C
Throttle Position Relearn Function	NO	YES
Crank Position Variation Relearn	NO	YES
Reset fuel trims and Alcohol composition	NO	YES
Cylinder Contribution Test	NO	YES
Operating system	Android 4.4.4	Android 4.4.4
Internal Memory	32GB	32GB
Processor	Cortex-A9 processor (1.5 GHz)	Cortex-A9 processor (1.5 GHz)
Audio Input/Output	Input: N/A & Output: Beep	Input: N/A & Output: Buzzer
Oil Reset, ABS, SRS, TPMS, EPB, SAS, DPF, BMS Resets	YES	YES
All Systems Diagnostics	YES	YES
Bluetooth, Wi-Fi	YES	YES
Software Update	One year free update	Online 1 Year update for free
Vehicle Coverage	Acura, Audi, Benz, Bmw, Auford, Bentley, Bugatti, Chevrolet, Ford, Chrysler, Euford, Gm, Holden, Honda, Isuzu, Hyundai, Infiniti, Jaguar, Kia, Maybach, Mazda, Land Rover, Lexus, Mini, Mitsubishi, Porsche, Saab, Nissan, Opel, Scion, Seat, Skoda, Subaru, Suzuki, Smart, Sprinter, Toyota, Vauxhall, Volvo, Vw	Acura, Audi, Bmw, Bugatti, Bentley, Benz, Chrysler, Citroen, Ford, Fiat, Dodge, Daewoo, Gm, Gmc, Holden, Honda, Hyundai, Infiniti, Isuzu, Jaguar, Jeep, Lexus, Maybach, Kia, Land Rover, Mazda, Mini, Opel, Porsche, Mitsubishi, Nissan, Peugeot, Seat, Skoda, Smart, Renault, Saab, Scion, Sprinter, Subaru, Suzuki, Volvo, Toyota, Vauxhall, Volkswagen, Vw
Dimensions(W x H x D)	9.4 x 5.9 x 1.4 inches	9.4 x 5.9 x 1.4 inches
Warranty	One-year warranty	12-month warranty for any product problems

Autel MK808 Professional tool has so many features:

The Autel MaxiCom MK808 diagnostic scan tool is an easy to use and powerful diagnostic scanner. It features an Android 4.4.4 operating system and A9 processor. This feature makes it be fast and quick in performing diagnoses. Also, it has a 7-inch LCD capacitive touchscreen that allows the user to perform multiple tasks at once. In addition, the multilingual system simplifies things for different users as one can change to a language they understand best

When it comes to functions, this scan tool performs almost all basic functions of an OBD2 scanner and some few advanced functions like the IMMO sensor. Other functions of the MK808 scan tool are read/erase error codes, view data streams for all systems, perform an oil reset, TPMS service, EPB reset, DPF service, ABS brake bleeding, SAS reset, and diagnose different systems such as transmission, engine, light system, brake system, fuel system, ABS, SRS, Wiper system, emission system, and much more.

Typical Pros:

Easy to use

Fast and accurate

Intuitive user interface

Extensive vehicle coverage

Full system diagnosis

Performs a wide range of functions

Rubber sleeve for protection

Sturdy carrying case for proper storage

Limited Cons:

It might have some compatibility issues with exotic vehicles

Which scanner is more suitable for customers?

Basing on what you want to use the scanner for, you will find that Autel MK808 professional diagnostic scanner is great for the DIY enthusiast and startup mechanics, while the Autel DS808 is ideal for professional technicians and busy auto repair shop. This is because the latter is quite costly and has more advanced features when compared to the former.

That's all. Thank you for sharing your time with us!

Don't forget to contact us at:

Email:  sales@CarDiagTool.co.uk
Skype: cardiag.co.uk
Whatsapp: +86 15002705698

Or leave a message at https://www.cardiagtool.co.uk/

to tell us what suggestions or questions you have about our products.

Source:http://blog.cardiagtool.co.uk/which-would-be-better-choice-autel-mk808-vs-autel-ds808/

Autel IM508 IM608 IMMO IV+MQB and MQB Key Programming Procedure

 CarDiagTool e-SHOP Online has Autel MaxiIM IM508 and IM608 in stock and gets highly praised by customers in European Areas.

2021 Global Version Autel MaxiIM IM608 Diagnostic and Key Programming Tool No IP Blocked

This article will share the content of IMMO IV+MQB and MQB Key Programming Procedure with Autel IM508 IM608 professional diagnostic tool specifically, with every single step listed below.

Go to Advanced Mode

1. MQB

Add key and all key lost two menus as follows:

Advanced Mode>MQB(Beta)>Key learning

Advanced Mode>MQB(Beta)>All keys lost

2. IMMO IV
3. Add key and all key lost two menus as follows:

Advanced Mode>IMMO 4 Instrument CAN>Key learning

Advanced Mode>IMMO 4 Instrument CAN>All keys lost

 

4. IMMO IV+MQB
5. Add key and all key lost two menus as follows:

Advanced Mode>IMMO 4 Instrument CAN>Key learning

Advanced Mode>IMMO 4 Instrument CAN>All keys lost

 

We will see the following content:

Part 1.IMMO data computation request interface.

Sever computation failed. Please contact the dealer!

Error code:1001

Part 2.Manually input pincode and cs code to do the key

learning.

1. IMMO IV

Make dealer key

Expert Selection>IMMO IV Instrument CAN>VDO NEC 24C64

2014>Make dealer key

Key learning:

Expert Selection>IMMO IV Instrument CAN>VDO NEC 24C64

2014>Key learning

   

Make dealer key (Input Cs CODE interface)

Key learning input pincode and cs code interface.

2. Immo iv+MQB key programming

Make dealer key:

Expert Selection>IMMO 4+MQB key >Generate dealer key

Key learning:

Expert Selection> IMMO 4+MQB key >Key learning

 

IMMO IV+MQB make dealer key input cs code interface.

IMMO IV+MQB Key learning interface.

3. MQB key programming

Menu Path

Expert Selection>Instrument MQB >VDO NEC 35XX>Make dealer key

Expert Selection>Instrument MQB >VDO NEC 35XX>Key learning

 

MQB make dealer key input CS code interface.

Without original key then has to input the 32 digits sync data.

  

MQB key learning input CS code interface

That's all. Thank you for sharing your time with us!

Don't forget to contact us at:

Email:  sales@CarDiagTool.co.uk
Skype: cardiag.co.uk
Whatsapp: +86 15002705698

Or leave a message at https://www.cardiagtool.co.uk/

to tell us what suggestions or questions you have about our products.

Source:http://blog.cardiagtool.co.uk/autel-im508-im608-immo-ivmqb-and-mqb-key-programming-procedure/

Launch X431 PAD V User Instruction: Software Update & Renew Subscription

 Launch X431 PAD V professional diagnostics is Launch's latest top-end car comprehensive diagnostic scan tool based on the Android 7.1 system. It also supports LAUNCH’s extension module applications for oscilloscopes, sensors, endoscopes, multimeters, and battery detection etc.

This article focuses on telling customers how to update the diagnostic software & App and set frequently used software.

If you did not download the software in process of product registration or a pop-up message prompting you that some new software can be updated, you may use this option to download it or keep it synchronized with the latest version.

We will see the content of this article include:

Part 1.Update Diagnostic Software & APP

Part 2.How to Set Frequently Used software

Part 3.How to Renew Subscription

Go and check below:

Part 1.Update Diagnostic Software & APP

Tap “Software Update” on the Home screen to enter the update center

By default, all diagnostic software is selected. To deselect certain software, tap “Unselect”, and then check the box next to vehicle model. Tap “Update” to start downloading. It may take several minutes to finish it, please be patient to wait. To pause downloading, tap “Stop”. To resume it, tap “Continue”. If network connection failure occurs, tap “Retry” to try again.

Once download is finished, the software packages will be installed automatically.

Part 2. How to Set Frequently Used software

To easily locate and quickly update some frequently used software, you can use the “Common Software” option to create a frequently used software list.

Tap “Common software” tap “+”, a pop-up window appears. Select the checkbox before the software name and tap “SAVE”, the software will be displayed in the Common software list. Next time you want to update it, just go to “Common Software”.

Part 3.Renew Subscription

If the software subscription is due or expires, the system will prompt you to renew your subscription and a “Renewal” button will appear on the bottom of the update page.

There are two ways available for you to make payment: PayPal and Subscription Renewal Card (*need to buy it from the local dealer where you purchased the X-431 PAD V).

1. Using PayPal
2. Tap “Renewal” on the update page to navigate to the renewal type selection screen.
3. Select “PayPal”, and then follow the on-screen instructions to finish the transaction.
4. After payment, go to update center to update the diagnostic software.
5. Using Subscription Renewal Card
6. Tap “Renewal” to navigate to the renewal type selection screen.
7. Select “Subscription Renewal Card”.
8. Input the 24-digit password of Subscription Renewal Card and then tap “Submit” to finish the renewal.
9. Go to the update center to update the diagnostic software.

That's all. Thank you for sharing your time with us!

Don't forget to contact us at:

Email:  sales@CarDiagTool.co.uk
Skype: cardiag.co.uk
Whatsapp: +86 15002705698

Or leave a message at https://www.cardiagtool.co.uk/

to tell us what suggestions or questions you have about our products.

Source:http://blog.cardiagtool.co.uk/launch-x431-pad-v-user-instruction-software-update-renew-subscription/

Autel IM508 Whole Programming Procedures & J2534 ECU Programmer Use Tips

 Autel MaxiIM IM508 key programmer is Android-based operating system and touchscreen diagnostic tablet that combines powerful immobilizer and key programming capabilities with advanced automotive diagnostics and service functions.

The Autel scanners programming application requires connection between the tablet and the XP200, and no vehicle connection is required. This application can access the key chip, read, retrieve and write key information, as well as other key related functions.

Select the vehicle manufacturer in the vehicle menu, and then follow the onscreen instructions to select the instrument information to display the function menu.

Here, we will take Chip Read & Write as an example.

1.Select Chip Read & Write from the menu.

2.Select the chip type if needed. In this example, select EEPROM.

3. Select “Read Operation” on the next menu.

.

4.The chip data screen displays. Select “Save” to save the data, or select

“Cancel” to exit.

5.Type the file name and select Confirm, the chip data will be saved on the

tablet. And a “File saved successfully.” Message displays.

6.Select Write Operation from the operations menu. The tablet will open the default folder, select the saved data and click Confirm to write it into a black chip.

Below, we will also share the use tips on “how to use J2534 ECU programmer with OE software”.

Step 1.You download the PC suite from Autel website, then run the PC suite app on your desk top.

Step 2.Connect your device to the computer through USB.

Step 3.During the process, select the following

Then you use it with the OE software.

If you want to buy J2534 ECU programming adapter, you can check this link: https://www.cardiagtool.co.uk/autel-maxiim-im608-plus-g-box2-adapter.html

That's all. Thank you for sharing your time with us!

Don't forget to contact us at:

Email:  sales@CarDiagTool.co.uk
Skype: cardiag.co.uk
Whatsapp: +86 15002705698

Or leave a message at https://www.cardiagtool.co.uk/

to tell us what suggestions or questions you have about our products.

Source:http://blog.cardiagtool.co.uk/autel-im508-whole-programming-procedures-j2534-ecu-programmer-use-tips/

Relevant article: http://obd2shop.blogaholic.se/2021/aug/116574/autel-im608-ford-explorer-2011-pcm-programmering-och-parameterterstllning/

Autel IM608 Ford Explorer 2011 PCM Programming and Parameter Reset

 Autel MaxiIM IM608 professional diagnostics combines the most advanced key programming and immobilizer capabilities with OE-level diagnostics and service functions. Equipped with XP400 key programmer and MaxiFlash JVCI ECU programmer, IM608 is a comprehensive immobilizer and key programming tool and ideal for auto technicians and locksmiths.

This article aims to tell you guys the procedure on how we replace and program the Powertrain Control Module (PCM) for Ford Explorer 2011 using Autel IM608. If we put on the new module without programming it, the car with new PCM will not start and immobilizer will act up.

So let’s see how to do it.

Step 1 PCM Programming

First we select “Diagnostics” and “Auto Scan” to enter the main menu.

Then we press

Programming>>Programmable Module Installation>>PCM

It will copy VIN number and other information from the module.

Press “OK” and confirm the VIN number.

Then switch off the ignition.

Install a new module (PCM) in vehicle as the prompt.

Then switch on the ignition.

Here the car won’t start as we mentioned before.

And make sure the battery is good and turn off all accessories.

Now it’s configuring information.

 

Switch off the ignition to finish this step.

Step 2 Parameter Reset

Back to Homepage,

We select “IMMO” and “Auto detect” to enter the main menu.

Then press

Smart key>>Control unit>>Keyless System(CAN)>>Key learning

Now we’ve got options about parameter reset.

We select “Parameter reset (BCM & PCM)”

Turn on the ignition.

Usually it takes ten minutes.

 

After that we have to do “Parameter reset (BCM & RFA)”

Once two parameter reset processes are finished, the car can start.

Done! Nice and simple!

This is how we replace a new PCM for Ford Explorer 2011 by Autel MaxiIM IM608 auto key programmer.

That's all. Thank you for sharing your time with us!

Don't forget to contact us at:

Email:  sales@CarDiagTool.co.uk
Skype: cardiag.co.uk
Whatsapp: +86 15002705698

Or leave a message at https://www.cardiagtool.co.uk/

to tell us what suggestions or questions you have about our products.

Source:http://blog.cardiagtool.co.uk/autel-im608-ford-explorer-2011-pcm-programming-and-parameter-reset/

OBDSTAR X300 PRO4: Introduction and Quick Start Guide

 OBDSTAR X300 Pro4 auto key programmer is an all-purpose immobiliser programming device meticulously designed by  OBDSTAR for locksmith in Europe area (Same IMMO Function As X300 DP PLUS key programming tool). The device inherits the automobile immobiliser programming technology from OBDSTAR with a lot of advantages of early start, wide model coverage, fast programming speed and special features.

The device keeping its software updating to latest car models. It’s cost-effective and high performance.

What are its advantages?

1.Free upgrade for half a year
2.Within help data and tips (pics as below)

  

3.Extensive vehicle coverage and keeps updating

4. Support one-click remote assistance, one-click upgrade, one-click key programming, one-click clearing fault code, one-button screenshot
5. 5-inch Advanced Android touch screen tablet

What Product Advanced Software does it have?

1.BMW CAS1 CAS2 CAS3 CAS3+ CAS3++ CAS4 CAS4+ FEM BDC key programming

2.BENZ disable/enable keys
3.MASERATI all series key programming up to 2020 (2018- car models need work with FCA cable)
4.PORSCHE 718,911, 997,BOXTER, CAYENNE,CAYMAN,MACAN,PANAMERA 49 make dealer keys and key programming, PORSCHE 911, 997, BOXTER, CAYMAN 46 decryption read pincode from original keys(work with P001 adapter)
5.LANDROVER JAGUAR key programming(free pincode),  2014-2018 car models make start keys( work with P001 adapter)

6.HYUNDAI/KIA all series key programming up to 2020, 46/47/8A/4A read pincode, engine replacement etc.

7.FORD/ LINCOLN all series key programming(free pincode) up to 2020, almost car models ALK in alarm active (no need to repeatedly disconnect/connect battery cables）

8.MAZDA all series key programming (free pincode) up to 2020

9.TOYOTA all series key programming up to 2018, 8A blade key all keys lost (work with Key SIM, no need to repeatedly disconnect/connect)

10.RENAULT/ DACIA read pincode by OBD, RENAULT new car models 4A read pincode by OBD (work with specific connector and P001 adapter)
11.NISSAN all series read pincode up to 2020 by OBD(including KICKS and some new car models)
12.SUBARU all series key programming, read IMMO data, make start keys, all keys lost (work with P001 adapter)
13. HONDA/ ACURA all series key programming (free pincode) up to 2020
14.PEUGEOT/ CITROEN, SD all series read pincode key programming(excluding a few car models)
15.VW/ AUDI/ SKODA/ SEAT/ ALFA ROMEO/ SMART/ LANCIA/ FIAT/ VOLVO/ IVECO/ ISUZU/ SSANG YONG/ MITSUBISH/ OPEL/ SUZUKI etc key programming
16. With OBDII diagnosis function

That's all. Thank you for sharing your time with us!

Don't forget to contact us at:

Email:  sales@CarDiagTool.co.uk
Skype: cardiag.co.uk
Whatsapp: +86 15002705698

Or leave a message at https://www.cardiagtool.co.uk/

to tell us what suggestions or questions you have about our products.

Source:http://blog.cardiagtool.co.uk/obdstar-x300-pro4-introduction-and-quick-start-guide/